|
qe |
ro |
uw |
Basic format Body Image size Films Lens mount Changing lenses Bed section Track. Draw-out |
4x5" Technical camera, 6x9cm rollfilm acceptable by changing the camera-back Light Die-cast alloy@@@@@@@@@@@@@@@@@@@@@@@@@@ 98~120 mm Sheet films, Polaroid packfilm Linhof-type/ accept WISTA or Linhof boards Changing with exclusive lens-board When opened the camera bed will automatically lock at 90 degree Triple extension; length: 66 { 82 = 148mm, Double track: Max 300mm by accepts longer-track (Track exchangeable) | ||
Focus adjustment |
1. Single axis dial system, dual image consolidation. 2. Other than 135, 150 and 180 mm Lenses Focus through ground glass. |
Focus inconjuction with draw-out knob. | |
Finder/Magnification Parallax function |
Albada's optical finder. Marked "View-frame" 120, 135, 150 and 180mm's Lenses. Magnification: 0.45 Do |
Nil Nil |
Nil Nil |
Bellows Camera-back |
Leather bellows standard. Leather Bag bellows Optional Leather longer bellows, 600mm Optional Bellows.......Exchangeable. Interchangeable 4x5" adaptor and Rollfilm slide adaptor (With automatic aperture control device). Ground-glass frame and 4x5" mounted filmholders interchangeable. 360 degree revolving back with O-detents every 90 degrees (Click stop). | ||
MOVEMENTS: Front and Back standard. FRONT:@Tilt @@@@@@ Rise @@@@@@ Swing SIDE: Shift |
15 degrees downward and degrees upward 56mm(Gear operation) 15 degrees(Horizontally) both-side 40mm both side W/friction locks and O-detents on focal axis | ||
BACK:@Tilt @@@@ @Swing |
Tilt: 90 degrees (forward), 15 degrees (back-ward) 15 degrees (Horizontally) | ||
Micro-back swing |
Nil |
Micro-focus: 4 degrees (Backward) |
Nil |
Dimensions (mm)/Weight Without lens |
215(H)~197(W)~100(T) 2.9Kgs/6.3Lbs |
180(H)~197(W)~105(T) 2.9Kgs/6.3Lbs |
180(H)~197(W)~100(T) 2.4Kgs/5.2Lbs |
Others |
Leather - strap, Tripod hole, Infinite distance stopper and ground-glass w/grid. |
Accessories shoe, Leather strap, Tripod hole, Flash-gun shoe and distance scale for 135mm lens. |
Basic Format |
4~5" Field camera |
Body (Varnish Sumac) |
Ebony, Rose and Cherry wood : Japanese lacquered, Hardware Brass, smoked gold color. |
Image size |
4~5", 98~120mm |
Using Film |
4~5", Sheetfilms, Polaroid packfilm and 6~9cm rollfilms. |
Lens mount |
Exclusive Wista and Linhof Lens board insertion system. |
Lens change |
Changing with exclusive lens-board. |
Camera body or bed settle |
Housing, Magnet-type : Camera-bed falls into notch in vertical |
Draw-out track |
Double extension rail system. |
Bed(Focus adjustment) |
Max. draw-out, upper-rail, 135mm. Max. length draw-out 300mm. |
Bellows |
Leather bellows(Unexchangeable) |
Front and Back movements Applied the DX and type-Umodels with minor difference. |
Tilt: Front Downward 90K, Upward 37K, Friction system. @@@Back Downward 16K, Upward 16K, Friction system. Rise: Front 56mm (manual operation) @@@Back Nil Swing: Front 15Khorizontally @@@Back 12K horizontally Shift: Front Nil @@@Back Type-U, Nil @@@@@@16mm horizontally (DX model) |
Camera-back |
Changeable either in horizontal and vertical. Exclusive WISTA 4~5", 6~9cm's Rollfilm holder is acceptable touch operation. |
Dimensions (mm) |
185mm(H) ~ 212mm(W) ~ 96mm(T) |
Weight |
@@@@@@@Ebony @@@Rose @@Cherry Type-U@@: 1.8kg @@1.75kg @@1.6kg DX Model@: 2.1kg @@2.00kg @@1.8kg |
Accessories |
International standard 4~5" cutfilm holders. 6~9cm Cutfilm holder on 4~5" mount. Exclusive (WISTA), 4~5" mount, 6~9cm's Rollfilm holder. Polaroid holder, 4~5" mount. |
Basic format: Format can be altered: |
International standard 4~5 in. 6~9 cm using the 4~5 cut film holder Cabinet 1/4 cut film 6~9 or 6~7 by means of 4~5 mountrollholder 6~9 or 6~7 by means 6~9 roll film slide adaptor |
Body: |
Light die-cast alloy |
Bed section: |
Monorail with 43mm diameter Basic rail of 230mm and 450mm Base designed on the basis of clamp type optical bench |
Front standard: |
Front focusing: Precise, fast to-and-fro movement along the monorail Micro focusing: By rack and pinion system on the monorail support Swing: The swing axis is on the micro focusing track, and its center is vertical to that of the lens Sift: Sliding horizontally on the swing support Rise/fall: Up/down movements along right and left poles Tilt: Vertical swing with the center at lens optical axis |
Lens board: |
153~153cm square |
Bellows: |
Leather bellows and envelop bellows, exchangeable |
Flange back: |
When used with one extension rail connected (total length 470mm with caps on both ends): @@With standard lens board and @@standard bellows-85 to 400mm @@With recessed lens board and @@envelop bellows-55 to 180mm |
Camera back: |
Revolving back Wista 45 Revolving Back can be used (with exclusive adaptor) Equipped with automatic diaphragm control device which coupled with Wista No.0 and No.1 shutters (made by Copal) Fresnal lens focusing glass with indication of 6~9 image size Focusing screen protected by transparent 10mm grid glass Focusing glass frame is removable |
Swing and tilt of front and rear standards: |
Rise/fall: 87mm respectively for front and rear Tilt (center tilt system): @@Front-45Kdown 35Kup @@Rear-45Kdown 35Kup Shift (independent system): @@35mm horizontally, for front and rear respectively Swing (independent system): @@40Khorizontally, for front and rear respectively |
Dimensions: |
Length without monorail and bench - 178mm Size without monorail but with bench- @@185 long~265 wide~380mm high Length of basic monorail with caps-240mmE470mm |
Weight: |
5.3kgs. with bench |
Accessories: |
Extension pipe envelop bellows for wide-angle lens use, longer bellows, 6~9 and 6~7 slide adaptors, cut film holders for use with various sizes, roll film holder, various types of lens boards for use with Wista (compatible with Linhof), and standard flat and recessed boards. |
Focal Length |
150m/m |
Max Aperture Ratio |
PF5.6 |
Lens Construction (element - group) |
T|U |
Covering Power |
5.6@65K |
22@ 75 | |
Image Circle |
5.6@189oΣ |
22 @210oΣ | |
Usable format |
T~Vh |
Shutter Size |
W/Copal@press @@@@O |
Shutter-speed range |
B.1`1/125 Sec |
Min. f/stop |
@@ @/45 |
Synchronization |
X@contact |
(A)Dimension (Front frame OD) |
@@@@48Σ |
(B)Screws for fitting filter |
46Σ@o0.75 |
(C)Rear frame OD |
46Σ |
(D)Screws for Flange |
32.5Σ@o0.75 |
(E)Flange focal length |
151.7o |
(F)Total Length |
56o |
Weight |
240Grams |
Focal Length |
180o |
Max Aperture Ratio |
PF5.6 |
Lens Construction (element - group) |
T|U |
Covering Power |
5.6@65 |
22@75 | |
Image Circle |
5.6@230oΣ |
22@ 255oΣ | |
Max.Format |
6 - 1/2 ~ 8 - 1/2h |
Shutter Size |
Wista/Copal@press P |
Shutter-speed range |
8.1`1/125@Sec |
Min. f/stop |
/45 |
Synchronization Dimension |
w@contact |
(A)Front frame OD |
57Σ |
(B)Screws for filter |
55Σo0.75 |
(C)Rear frame OD |
56Σ |
(D)Screws for Flange |
39Σo0.75 |
(E)Flange focal length |
160o |
(F)Total length |
67o |
Weight |
380Grams |
Focal Length |
210mm |
Max Aperture Ratio |
PF5.6 |
Lens Construction (element - group) |
S|U |
Covering Power |
5.6@65 |
f22 75K | |
Image Circle |
5.6@252oΣ |
22@ 295oΣ | |
Max.Format |
W~10h |
Shutter Size |
Wista/Copal@press @@@P |
Shutter-speed range |
B.1`1/125 Sec |
Min. f/stop |
/64 |
Synchronization Dimension |
X@contact |
(A)Front frame OD |
64Σ |
(B)Screws for filter |
62Σo0.75 |
(C)Rear frame OD |
65Σ |
(D)Screws for Flange |
39Σo0.75 |
(E)Flange focal length |
195.2o |
(F)Total Length |
79.6o |
Weight |
475Grams |
Film size |
85mm~108mm. |
Format |
74mm~95mm.@4Lens 1/4 divided shot. @@@@@@@@@@2Lens 1/2 divided shot. |
Filmholders |
Exclusive WISTA Packfilm holder. (Accept Polaroid 100 and 600 series, Fotorama FP 100 and FP 3000B) |
Body |
Light die-cast alloy. (packfilm holder replacement system) |
Photograph size |
4Lens 24~30mm to 35~45mm as required. 2Lens 24~30mm to 45~70mm as required |
Exchanging size |
To operate the distance indicator beside camera body. |
Finder |
Focusing screen with center ruled, correct subject through the finder target. |
Lens |
3 element optical lenses, Focal length 125mm, F:8. |
F : Stop |
Single axis, 4 lenses simultaneous system, F : 8 to F : 90. |
Shutter |
Single axis rotary shutter, shutter speed 1/30 sec. Shutter setting not necessary. One touch Ever-set method. Build - in Synchronized point X. |
Weight |
Camera body with packfilm-holder (Exclusive) 2.1kgs. @@@@@@@@@@@@@@Weight for body itself: 1.72kgs. |